DaVinci (Servo) Model D1419

 

 

Techno’s Servo DaVinci’s is a unique tabletop machine, suitable for a wide range of applications from model making, woodworking, plastic fabrication, signage, etc. The machine is constructed out of state-of-the-art extruded aluminum profiles (similar to what is used in the aircraft industry) and is light, portable yet rigid.


Built on engineering principles that have long been accepted as the foundation blocks for accurate & dependable operation, the DaVinci Servo system features: hardened steel linear ways, ballscrews on each axis and servo control.

 

 

 

 

 

 

                                                                                                                                                                              

Techno (Servo) DaVinci Specifications

Machine Model

Work Envelope (X x Y)

Repeatability

Maximum Speed in/min

Bridge

 Clearance

Z-Axis Travel

Motor

D1419

19.6 x 14.7

.0004

250

4.9

6.8

Servo

• Drive System: Ball screws with anti-backlash ball nuts (Ψ.63", pitch .19")
(Ψ16 mm, pitch 5 mm)

• Protection: Integral covers with rubber seals on all axes

• Repeatability: ±.0004" (±.01 mm)

• Accuracy: ±.0004"/in (±.1 mm/300 mm)

• X-Y Axes Travel: 19.6" x 14.7" (500 mm x 375 mm)

• Z Axis Travel: 6.9" (175 mm)

• Resolution: .0001" (.0125 mm) on all axes

• Thrust: 200 lbs. (115 kgf) on all axes at low speed

• Motors: 50 oz.in. cont./250 oz.in. peak brush servo motor on XY axes

 

• 4 patented double bearing blocks on each axis

 

• 4 T-slots on 50mm centers are provided to mount the tools

 

• Work surface flatness: .008"/ft (.65 mm/m)

 

• Rapid travel: 250 IPM (11500 mm/min)

 

• Cutting feed rate: 200 IPM (6350 mm/min)

• 55 oz.in. cont./300 oz.in. peak brush servo motor (with brakes) for Z-axis

• Software Included: Fanuc G-M Code translator, Techno full screen previewer

• PC programmable — communications cable supplied

• 3D linear, 2-axis circular (XY, XZ, YZ) toolpath capability

 

• This unit can cut a CO2 car in under 12 minutes

 

• Gantry clearance 30" wide by 6.5" high for cutting very wide parts


• 2pcs. 225mm clamp bars and 2 heavy duty cam clamps for fixturing


• 24VDC input/120VAC output relay box to turn router ON/OFF automatically


• Plexiglas safety shield included


• Variable speed spindle: 800 W, 8,000-24,000 rpm., 1/8", 3/16", 1/4", collets


• Dust shroud
 

HX33LBME242202    Price:  $10,995.00

Model D1419 DaVinci (Servo)

 Includes: two clamp bars, two cam locks, variable speed spindle, computer cable, shroud, and the Fanuc G-M code translator.

Please Note: Shipping cost are not included in the above prices

 

Estimated Leasing Cost

Leasing options are available on a (3) or (5) year basis.  Lease factors are outlined below.

Lease Structure                         36 Months                      60 Months

10% Purchase Option                  .  03082                            .01998

You can calculate estimated monthly payment by multiplying your system total cost by the above factors.

Example: $10,000.would be 10.0 x .01998 = $199.80 per month payment for a 60 month period

 

Techno (Servo) DaVinci Options

 

H24P00-5182ST   Price:  $950.00
3.25 HP Variable Speed Router, 10-22K RPM, 1/4", 3/8", 1/2" collets, mtg. block, dust shroud.

     
HX3500-2422SRV01   Price:  $2,950.00
Machine stand, safety enclosure, vacuum dust collector.

 
HX3500-2422SRV02   Price: $1,950.00
Machine stand, vacuum dust collector, no safety enclosure.

 
HX3500-242SHLF   Price: $480.00
Computer shelf that attaches to the Machine Stand/Enclosure
 
Roll-around casters – add $400.
 

Techno (Servo) DaVinci Additional Options

 


Porter Cable 3.25 HP Wood/Plastic Router

Amps: 15 (120VAC, 60Hz)
Speed: 10000, 13000, 16000, 19000, 22000 rpm
Motor Ψ: 4.5"
Includes: 1/2", 1/4" , 3/8" collets, shroud, wrench set, mounting bracket, dust shroud
Part #: (for complete set): H24P00-5182ST
Price: $950.00
 

Porter Cable Vac Shroud (For 3.25 HP Router)
Part #: H24X30-SHROUD003
Price: $295.00

 

800 Watt, Variable Speed Spindle
Power: 800 W
Speed: 8000 to 26000 rpm, variable
Includes: 1/8" and 1/4" collets and a 3/16” adapter collet for attachment to machine surface, dust shroud
Part #: (for complete set): H24K00M82104ST
Price: $395.00

800 W Router Vac Shroud

 Part #: H24X30-SHROUD001
Price: $100.00
 

 

 

 

Engraving Head Set
Power: 800 W
Speed: 8000 to 26000 rpm, variable
Includes: 1/4", 1/8", and 11/64" collets and drawbars, as well as .005", .010", and .020" engraving cutters
Part #: (for complete set): H24Z50-ENGRAVER
Price: $1,720.00

Geometrics     200 Martin Lane    Elk Grove Village, IL  60007

847-338-0524