|
Vacuum Table Options
HX3510-V7812-003 Vacuum Table (78x120) LC Series -$4000.00
Includes: 8-zone manifold with individual valves,
phenolic top with channels for vacuum zone
separation, 2 packages of rubber plugs and 6
packages of gasket material for custom vacuum
zone creation, Start/Stop to turn the vacuum pump
ON/OFF.
HX3510-V5912-003 Vacuum Table (59x120) LC Series -$3000.00
Includes: 6-zone manifold with individual valves,
phenolic top with channels for vacuum zone
separation, 2 packages of rubber plugs and 6
packages of gasket material for custom vacuum
zone creation, Start/Stop to turn the vacuum pump
ON/OFF.
HX3510-V4896-003 Vacuum Table (48x96) LC Series -$2500.00
Includes: 5-zone manifold with individual valves,
phenolic top with channels for vacuum zone
separation, 2 packages of rubber plugs and 6
packages of gasket material for custom vacuum
zone creation, Start/Stop to turn the vacuum pump
ON/OFF.
HX3510-V4848-003 Vacuum Table (48x48) LC Series -$2400.00
Includes: 5-zone manifold with individual valves,
phenolic top with channels for vacuum zone
separation, 1 packages of rubber plugs and 3
packages of gasket material for custom vacuum
zone creation, Start/Stop to turn the vacuum pump
ON/OFF.
HX3510-V3024-003 Vacuum Table (30x24) LC Series -$1900.00
Includes: 3-zone manifold with individual valves,
phenolic top with channels for vacuum zone
separation, 1 packages of rubber plugs and 2
packages of gasket material for custom vacuum
zone creation, Start/Stop to turn the vacuum pump
ON/OFF.
H35X13-10HP-005 8-1/2 HP 100% Oil-less
dry Vacuum Pump -$5995.00
230V-3Phase
Rated for: 173 CFM, 25 Hg Vacuum (81 db)
Requires a dedicated 40 amp circuit.
(Also available in 440VAC)
This pump is suitable for holding down flat stock or small
work pieces because of the high vacuum pressure. Note
also that this pump is relatively quiet and can be run
inside a class. This pump is also available in 380-440V 3 phase
Software for Converting
Scanned Points to Surfaces
H22 I10-RHINOLAB 1 Educational Rhino-3D Software (Lab Kit) -$975.00
Lab kit for educational use.
Includes three user guides, one training guide, one
instructors guide and one CD.
The software may be installed on an unlimited number
of computers in a single classroom.
Please check the Rhino web site for 3rd party plug-ins for point cloud
conversion.
H22I10-RHINOED 1 Educational Rhino-3D Software (Single User)
-$195.00
The following item forms a non-contact Laser Scanner Digitizer
H22X10-ESCAN Tech-Scan Laser Scanner -$16,895.00
Set includes laser scanner, mounting accessories,
scanner protection hood, and software. Two lenses for
different scan depth and resolution, Rhino lab license
and Rhino plug in to convert point clouds to surfaces.
This laser scanner can scan details down to the face of
a coin and the software forms the ideal package to do
reverse engineering and surface generation.
This is the perfect companion to a stereo-lithography
printer for a complete system to do reverse engineering
model making and prototyping.
Alternate digitizer: This is a manual contact digitizing arm
system
Allows for the construction of 2D and 3D models by
tracing the surface features of actual parts. Can also be used for
tracing the 2D boundary of a part.
Package includes: 3D digitizer and digitizing interface software
for PC to collect data through AutoCAD, Mastercam and most other
CAD/CAM software packages.
H22X10-3DPROBE 3D Touch probe with data
collection software -$1000.00
A touch probe mounts into spindle for data collection.
User specifies XY range and X resolution and Y resolution.
Data output is in a number of standard formats.
4th Axis
HX36V0M15877 1 Rotary Table SET (Servo) for RG Systems -$4048.00
Includes: servo rotary table 1, center set, vertical
mounting set, tailstock, amplifier, LM628 chip and a
25' servo motor cable. This system is designed for
4th axis or rotary carving
|
